| Press Design |
| drive system: eccentric / crank |
|
|
| number of suspensions: |
12 |
|
| Press forces |
| total force (nominal): |
45 |
to |
| Dimensions / weights |
| space requirements -left/right-: |
3658 |
mm |
| space requirements -front/back-: |
1829 |
mm |
| total height: |
3200 |
mm |
| total weight approx.: |
20000 |
kg |
Platarg 912 ICOP Transfer Press 6.5″ Stroke – 3.15″ Max Part Length
* Strip and Release on the Stripper Forks
* 11 Stripper forks included
* Full Set of Bottom Cams with Kick up lever style
* Oil Cup Lube on Top Shaft
* Bijur Oiler Pump – Chain Drive, feeding all moving surfaces
* Counter Balance pneumatic cylinders on top
* Platarg 6″ wide chopper – Bottom Shaft driven with cam
* Platarg Air Clutch & Brake – Like Minster set up
* Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels.
* Tie Rod frame construction – rods on each side of top shaft
* Press is 9’3″ tall without Counter Balances, 10’6″ with Counter Balances. For Transport it can ship at 9’3″ Tall.
* Press is on shop floor under power and can be inspected. Good working older Platarg.
* New 1968. Seller bought it new from Factory.
