| Slide | ||
|---|---|---|
| total force (nominal): | 630 | to |
| stroke rate (max.): | 180 | /min |
| cutting velocity min.: | 3 | mm/s |
| cutting velocity max.: | 12 | mm/s |
| closing velocity: | 100 | mm/s |
| returning velocity: | 100 | mm/s |
| V-Ring | ||
|---|---|---|
| nominal force: | 230 | to |
| stroke: | 30 | mm |
| Counter Ram | ||
|---|---|---|
| nominal force: | 120 | to |
| stroke: | 30 | mm |
| Tool Dimensions | ||
|---|---|---|
| lower table (left-right): | 900 | mm |
| lower table (front-back): | 900 | mm |
| upper table (left-right): | 900 | mm |
| upper table (front-back): | 900 | mm |
| range of transfer pins – in strip direction: | 260 | mm |
| Strip-Feeder | ||
|---|---|---|
| feeder type: roll feeder | ||
| sheet width max.: | 450 | mm |
| sheet thickness max.: | 14 | mm |
| feeding step min.: | 1 | mm |
| feeding step max.: | 999 | mm |
| nominal force: | 6 | kN |
| Electrical specifications | ||
|---|---|---|
| total power consumption: | 80 | kW |
| Attachments -Fineblanking Press- | ||
|---|---|---|
| decoiler: optional | ||
| leveller unit: optional | ||
| waste cutter: yes | ||
| slug separator: no | ||
