| Press Design | ||
|---|---|---|
| drive system: knuckle-joint | ||
| feedstock transport direction: right to left | ||
| Slide | ||
|---|---|---|
| total force (nominal): | 80 | to |
| stroke: | 50 | mm |
| stroke rate (max.): | 70 | /min |
| Counter Ram | ||
|---|---|---|
| nominal force: | 22 | to |
| V-Ring | ||
|---|---|---|
| nominal force: | 25 | to |
| Tool Dimensions | ||
|---|---|---|
| lower table (left-right): | 430 | mm |
| lower table (front-back): | 490 | mm |
| upper table (left-right): | 420 | mm |
| upper table (front-back): | 420 | mm |
| shut height max.: | 230 | mm |
| ram adjustment: | 80 | mm |
| distance between columns (H-frame): | 450 | mm |
| passline opening (free passage in side columns): | 200 | mm |
| Overall Specifications (coil lines) | ||
|---|---|---|
| sheet width max.: | 180 | mm |
| sheet thickness max.: | 5 | mm |
| Strip-Feeder | ||
|---|---|---|
| feeder type: roll feeder | ||
| sheet width max.: | 180 | mm |
| sheet thickness max.: | 5 | mm |
| feeding step max.: | 180 | mm |
| sheet length min: | 1350 | mm |
| band lubrication system: yes | ||
| Crop Shear | ||
|---|---|---|
| sheet thickness max.: | 5 | mm |
| working width max.: | 180 | mm |
| stroke rate (max.): | 70 | /min |
| cutting force: | 65 | kN |
| Electrical specifications | ||
|---|---|---|
| total power consumption: | 10 | kW |
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 1480 | mm |
| space requirements -front/back-: | 1600 | mm |
| total height: | 2280 | mm |
| total weight approx.: | 6000 | kg |
